Friday, August 12, 2022
HomeElectronicsEquipping a go-kart with an omni wheel for infinite drifting

Equipping a go-kart with an omni wheel for infinite drifting

Equipping a go-kart with an omni wheel for infinite drifting

Arduino StaffJuly twenty first, 2022

An omni wheel, typically referred to by the extra particular commerce identify “Mecanum” wheel, is a novel sort of wheel with “tread” made up of a number of rollers oriented at an angle relative to the wheel’s spin route. They permit for ahead driving like another wheel, but in addition sideways and rotational locomotion relying on the vectoring of all of a automobile’s wheels working in live performance. James Bruton used omni wheels on lots of his robots prior to now and in his most up-to-date challenge he geared up a go-kart with an omni wheel for infinite drifting.

The go-kart has three drive motors. Two Hoverboard-style hub motor/wheel combos sit on the entrance of the go-kart on a steering rack. They supply regular front-wheel drive dynamics. However in the back of the go-kart there’s a giant omni wheel oriented perpendicular to the entrance wheels (at their impartial place). That signifies that the omni wheel’s rollers are inline with the automobile. These rollers spin freely, so the go-kart drives usually. However when Bruton spins the omni wheel motor, the rear finish of the go-kart slides out in a drifting maneuver.

To coordinate the ability going to every of the three motors, Bruton used an Arduino Uno board for torque vectoring. The driving force controls the spin route of the omni wheel utilizing a pair of e-bike throttles mounted to the steering wheel. Additionally they management the velocity of the entrance two Hoverboard motors utilizing an accelerator pedal with a Corridor impact sensor. All three motors obtain energy by means of giant ESCs (digital velocity controllers), however the Arduino is important to calculate how a lot energy every motor receives. For instance, if the driving force pushes each e-bike throttles, the Arduino will test to see which throttle is turned additional after which inform the omni wheel’s motor to spin within the corresponding route.

As you’ll be able to see in Bruton’s movies, this setup labored fairly effectively. The go-kart drifted simply anytime Bruton needed. It was a bit tippy, as a result of there is just one wheel within the again, however Bruton says that the addition of a second wheel would clear up that drawback. 

You may observe any responses to this entry by means of the RSS 2.0 feed.
You may depart a response, or trackback from your personal web site.



Please enter your comment!
Please enter your name here

Most Popular