Tuesday, August 9, 2022
HomeElectronicsLet's Get to Rework - Information

Let’s Get to Rework – Information

Our new Sizzling-Air Rework Station is right here together with a brand new LED Mission Package, RPi Picos, and Third-Hand Package!




Hi there, everybody! We’re again this week with extra new merchandise! If you happen to stopped by yesterday, you most likely already know in regards to the new Raspberry Pi announcement with the addition of wi-fi capabilities and headers on two distinctive Pico boards. On high of that, we’ve a model new model of our well-liked Sizzling-Air Rework Station with a brand new set of options that modernizes the instrument for todays requirements. Following that, we’ve have a brand new LED Mission Package that’s very best for growing minds to start out in electronics, in addition to a brand new third hand package! Alright, let’s bounce in and take a more in-depth look!


Properly… that is a brand new option to put together crème brûlée.

This hot-air rework station is nice for professionals and hobbyists in want of tight temperature tolerances and enormous air flows. This unit shows a digital readout of the particular air temperature with a movement fee of as much as 23L per minute. This very highly effective unit can be utilized for a number of functions, together with normal SMD reflow/restore/elimination, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.

This newest model of the hot-air rework station has some nice enchancment: a brand new temperature vary of 100℃-500℃, an auto sleep perform, and a temperature offset perform.

Raspberry Pi Pico W

Raspberry Pi Pico W

Out of inventory


The Raspberry Pi Pico W builds upon the nice cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W options the identical attributes because the Raspberry Pi Pico and likewise incorporates an Infineon CYW43439 wi-fi chip. CYW43439 helps IEEE 802.11 b/g/n wi-fi LAN, and Bluetooth® 5.2. (6/30/2022: Solely Wi-fi LAN is supported on the Pico W in the intervening time, this shall be up to date as the brand new options grow to be out there)

Raspberry Pi Pico H

Raspberry Pi Pico H

In inventory


The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with versatile digital interfaces. It characteristic the RP2040, which marks Raspberry Pi’s first microcontroller designed in-house. Pico supplies minimal (but versatile) exterior circuitry to assist the RP2040 chip (flash, crystal, energy provides and decoupling and USB connector). This variation comes with a set of male headers pre-soldered to all through-hole vias and a 3 pin debug connector. The spacing stays 2.54mm and breadboard suitable (much more so now with the addition of the male headers).

The SparkFun LED Mission Package is an effective way to get began with programming and {hardware} interplay with the Arduino programming language. Every SparkFun LED Mission Package contains all the things you should full seven initiatives that can educate you methods to blink an LED, create an evening gentle, make a Simon Says recreation, and extra. You do not want any earlier programming or electronics expertise to make use of this package.

Magnetic Third-Hand Kit

Magnetic Third-Hand Package

In inventory


If you happen to want an additional pair of palms (or three!) to assist with the extra delicate, detailed work, you’ll admire this Magnetic Third-Hand Package. Prefect for any digital, soldering, crafting, portray, duplicate, figurine, macro pictures and interest work – or any precision venture that requires excessive accuracy.

That is it for this week. As all the time, we won’t wait to see what you make. Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be protected on the market, be variety to at least one one other, and we’ll see you subsequent week with much more new merchandise!

By no means miss a brand new product!



Please enter your comment!
Please enter your name here

Most Popular